How To – RGB To HSI And HSI To RGB Color Model In C#

This guide shows how to convert RGB to HSI image data and also how to convert it back from HSI to RGB to make it displayable on screen.


Andraz Krzisnik
How To – RGB To HSI And HSI To RGB...

Welcome to another image processing tutorial, where we’ll learn how to convert RGB to HSI color model and vice versa. Furthermore, we’ll take a look what goes on behind the curtains and develop code for it using C# programming language.

RGB color model

This type of color model is one of the most widely used, because it carries color image data that our computer screens and phones can display. It’s based on Cartesian system, where we can describe colors inside a cube.

RGB color model cube
RGB color model cube

As we can see from the image above, each dimension represents one of the primary colors, red, green and blue. This is also why we call it RGB model.

So to display a color image on our screen, we actually need 3 component images, one for each color channel. In other words, each color image we see on screen is a composite image which consists of component channel images.

When we’re dealing with grayscale images, the values pixels carry are equal across all color channels. To visualize that, we can see from the cube above that all shades of gray lie on a line that connects origin and the point farthest from it.

Therefore, we could classify grayscale as 8-bit images, which means they have pixel depth of 8 bits. On the other hand, when we’re dealing with color images, we have different values across all color channels. Therefore, the pixel depth of a color image is 24 bits.

HSI color model

Other color models like RGB and CYM aren’t good at describing colors in a way that would be practical for human interpretation. HSI color model however, decouples intensity component from color carrying information components. Which gives us ways to display colors closer to our interpretation.

HSI stands for hue, saturation and intensity. Furthermore, hue describes pure color, saturation is a measure how diluted colors are with white light. We’re already familiar with intensity, which is a key factor for describing color sensation. It is also most useful for achromatic or grayscale images.

Converting RGB to HSI color model

Converting between the color models requires computing values one pixel at a time. So it may be computationally intensive if we try converting it too many times in a short amount of time. This holds especially for images with larger dimensions.

To avoid dividing by 0, it’s a good practice to add a very small number in denominators of conversion formulas.

rgb to hsi hue component formula
Hue component formula
hue angle formula
Hue angle formula

The R, G and B variables presented in the formulas above are pixel color channel components – red, green and blue.

rgb to hsi saturation component formula
Saturation component formula
rgb to hsi intensity component formula
Intensity component formula

Now with all the formulas we will need, all that’s left for us to do is write the function that will do the job.

C# function for converting RGB to HSI components

public static double[][] RGB2HSI(this Bitmap image)
     {
         int w = image.Width;
         int h = image.Height;
         main.width = w;
         main.height = h;

         BitmapData image_data = image.LockBits(
             new Rectangle(0, 0, w, h),
             ImageLockMode.ReadOnly,
             PixelFormat.Format24bppRgb);
         int bytes = image_data.Stride * image_data.Height;
         byte[] buffer = new byte[bytes];
         Marshal.Copy(image_data.Scan0, buffer, 0, bytes);
         image.UnlockBits(image_data);

         double[][] result = new double[w * h][];
         for (int x = 0; x < w; x++)
         {
             for (int y = 0; y < h; y++)
             {
                 int pos = x * 3 + y * image_data.Stride;
                 int r_pos = x + y * w;
                 result[r_pos] = new double[3];
                 double b = (double)buffer[pos];
                 double g = (double)buffer[pos + 1];
                 double r = (double)buffer[pos + 2];

                 double[] pixel = { r, g, b };
                 double num = 0.5 * (2 * r - g - b);
                 double den = Math.Sqrt(Math.Pow(r - g, 2) + (r - b) * (g - b));

                 double hue = Math.Acos( num / (den));
                 if (b > g)
                 {
                     hue = 2* Math.PI - hue;
                 }

                 num = pixel.Min();
                 den = r + g + b;

                 //if (den == 0)
                 //{
                 //    den = 0.00000001;
                 //}

                 double saturation = 1d - 3d * num / den;
                 if (saturation == 0)
                 {
                     hue = 0;
                 }

                 double intensity = (r + g + b) / 3;

                 result[r_pos][0] = hue;
                 result[r_pos][1] = saturation;
                 result[r_pos][2] = intensity;
             }
         }
         //transpose
         double[][] result_t = new double[3][];
         for (int i = 0; i < 3; i++)
         {
             result_t[i] = new double[w * h];
             for (int j = 0; j < w * h; j++)
             {
                 result_t[i][j] = result[j][i];
             }
         }

         return result_t;
     }

Converting HSI to RGB color model

Now, to turn it back into displayable images we need to turn it back to RGB model. We’ll deal with a lot more angles and trigonometry so we’ll need to be careful we compute everything either in degrees or radians.

It depends on the hue angle, how we’ll compute RGB values. Let’s take a look at the formulas and see what I mean.

For hue angle between 0 and 120 degrees or 2/3 of pi in radians we use following formulas.

conversion formulas for RG sector
HSI to RGB conversion formulas for RG sector

And for hue angle between 120 and 240 degrees. But first we need to subtract 120 degrees from the angle before we input them in the following formulas.

conversion formulas for GB sector
HSI RGB conversion formulas for GB sector

And finally, for hue angle between 240 and 360 degrees. We need to subtract 240 degrees from the angle before we begin.

conversion formulas for BR sector
HSI to RGB conversion formulas for BR sector

Okay, this is all the formulas we’re going to need to convert from HSI to RGB model. Let’s take a look at the code that will do all the work.

C# function for HSI to RGB conversion

public static Bitmap HSI2RGB(this double[][] hsi_map)
     {
         int w = main.width;
         int h = main.height;

         Bitmap image = new Bitmap(w, h);
         BitmapData image_data = image.LockBits(
             new Rectangle(0, 0, w, h),
             ImageLockMode.WriteOnly,
             PixelFormat.Format24bppRgb);
         int bytes = image_data.Stride * image_data.Height;
         byte[] result = new byte[bytes];
         for (int x = 0; x < w; x++)
         {
             for (int y = 0; y < h; y++)
             {
                 int pos = x * 3 + y * image_data.Stride;
                 int hsi_pos = x + y * w;
                 double H = hsi_map[0][hsi_pos];
                 double S = hsi_map[1][hsi_pos];
                 double I = hsi_map[2][hsi_pos];
                 byte red = 0;
                 byte green = 0;
                 byte blue = 0;

                 if (H >= 0 && H < 2*Math.PI/3)
                 {
                     blue = (byte)(I * (1 - S));
                     red = (byte)(I * (1 + S * Math.Cos(H / Math.Cos(Math.PI / 3 - H))));
                     green = (byte)(3 * I - (red + blue));
                 }

                 else if (H >= 2*Math.PI/3 && H < 4*Math.PI/3)
                 {
                     red = (byte)(I * (1 - S));
                     green = (byte)(I * (1 + S * Math.Cos(H - 2 * Math.PI / 3) / Math.Cos(Math.PI - H)));
                     blue = (byte)(3 * I - (red + green));
                 }

                 else if (H >= 4*Math.PI/3 && H < 2*Math.PI)
                 {
                     green = (byte)(I * (1 - S));
                     blue = (byte)(I * (1 + S * Math.Cos(H - 4 * Math.PI / 3) / Math.Cos(5 * Math.PI / 3 - H)));
                     red = (byte)(3 * I - (green + blue));
                 }

                 result[pos] = blue;
                 result[pos + 1] = green;
                 result[pos + 2] = red;
             }
         }
         Marshal.Copy(result, 0, image_data.Scan0, bytes);
         image.UnlockBits(image_data);
         return image;
     }

As you probably noticed, I used angles in radians. This is because the functions calculate angles in radians so there’s no way around this but to convert from degrees to angles in case you’re using them.

Conclusion

This tutorial was quite exhaustive no doubt, but I assure you the understanding we can get from it will pay off in the following tutorials on processing color images.

I hope this guide was helpful. You can also download the demo project and play around with the values.

Related Articles

Grayscale Morphology

How To Make Top Hat Transformation Work With C#

Top hat transformation is a grayscale morphological operation in image processing, we can use for extraction of certain objects in the image.

Posted on by Andraz Krzisnik
C# Image Processing

How To Use Fourier Transform On Images – C# Guide

Fourier transform is an equation that turns normal pixel values into complex numbers. But to know what these complex numbers mean, we should give a little more context to them by...

Posted on by Andraz Krzisnik